Model Number

GA728

Model GA728 conveyor belting Loom

This machine is mainly applicable to weave multi-layer true conveyor belting fabrics, especially to weave 4 layers grade 6-8 integral core for fire retardant conveyor used in the coal mine or at the wharf.

Main Structures and Technical Parameters

1��/span>Reed width: 1400mm, 1650mm.

2��/span>Beating-up: crankshaft weft beating.

3��/span>Weft insertion: double-rapier weft insertion.

4��/span>Overlocking: independent hook needle overlocking mechanism.

5��/span>Weft feeding: tension compensating mechanism.

6��/span>Let-off: four rubber-covered rollers are tightly grasped with steel roller; positive speed-adjusting continuous let-off.

7��/span>Shedding: single dobby mechanism, conjugate cam positive driving, dobby shedding is controlled by pattern paper and peg, 16 heald frames.

8��/span>Take-up: ratchet type pin-roller intermittent take-up.

9��/span>Warp supplying: creel-type continuous warp supplying without yarn tail.

10��/span>Driving: The driving system consists of motor, band pulley and gear, etc. Main drive motor: 4KW竊�/span>960rpm (Model 140)竊�/span>5.5KW竊�/span>960rpm (Model 165).

11��/span>Loom speed: 15-80rpm (frequency stepless regulating speed).

12��/span>The electric part has the fuction of starting, dot motion, rapid stopping, etc.

13��/span>Overall dimension (not including creel) (length×width×height) (mm):

4500×3860×2400 ( Model 140); 4950×4760×2600 ( Model 165).

14��/span>Weight: about 5T